Duplex 2205 / UNS S32205 Fasteners

ASME SA182 Duplex Steel S32205 Hex Bolt, ASTM A182 Duplex S32205 Heavy Hex Nut, Werkstoff Nr. 1.4462 Hex Nut, UNS S32205 Nut, Duplex S32205 Fasteners, DIN 1.4462 Spring Washer, Duplex Steel S32205 Plain Washer.

What do you understand about Duplex Steel S32205 Fasteners?

The chemical composition of Duplex 2205 Fasteners forms a great mixture. Various components
make up the chemical makeup of this fastener grade. Nickel (4.5–6.5%), chromium (22-23%), and
molybdenum (3–3.5%) make up the majority of this substance. Less than 1% of each extra component
makes up the makeup. Among them are silicon, phosphorus, manganese, iron, carbon, nitrogen, and
sulfur. Because of their durability, utility, and high caliber, these fasteners are used extensively
worldwide. Some notable applications for these Duplex Steel S2205 Fasteners include the petroleum
and natural gas industries, pipelines, power stations, cement factories, railways, electric vehicles and
motors, agricultural implements, home furnishings, mining equipment, ornamental ironwork, industry
frames, etc. Non-permanent couplings are other materials that can be made using these fasteners.
These fasteners do not cause any harm to such joint material. These fasteners are also a suitable
alternative for business and industrial fastening requirements.

industrial
stainless-steel-321-fasteners

About Duplex 2205 / UNS S32205 Fasteners

DIN 1.4462 Threaded Rod, UNS S32205 Fasteners, Werkstoff Nr. 1.4462 U Bolt, Grade S32205 Bolt, Duplex Steel S32205 Heavy Hex Bolt, ASTM A182 Duplex S32205 Threaded Rod, ASME SA182 Duplex Steel S32205 Stud Bolt.

This grade of fastener has an enduring functional life and a high level of accuracy. Highly advanced and furnished equipment is used to manufacture these fasteners. The density of this grade of fasteners is 7.805gm/cm3, and the melting point ranges from 1420-1465 degrees Celcius. For Duplex Steel 32205 fasteners, an outer diameter range of 3mm to 200mm is available. These fasteners are available in lengths from M02 to M30. Only two of the mechanical properties of the round bar are hardness brinner, which has a value of 290, and tensile strength, which has a value of 655 Mpa. These fasteners have a 25% lengthening.
They do, however, have a 450 Mpa yield strength. For these fasteners, the suggested requirements are ASTM A182, ASTM A1082, and ASME A479. There is a good chance that these fasteners won trust. The material is subjected to various tests, including macro- and micro-tests, hardness measures, tests for pitting resistance, flaring tests, enhanced corrosion tests, hardness tests, flattening tests, and much more to assess endurance and quality. The production process of these fasteners includes hot forging and cold forging. Several surface coatings are also done on these fasteners, including layers of elements like xylon, zinc, Teflon, phosphate, etc. The fasteners are also well known for their superior mechanical strength and stress tolerance.

Types Of Duplex 2205 / UNS S32205 Fasteners

bolt fasteners
Duplex 2205 / UNS S32205 Bolt
stud bolts
Duplex 2205 / UNS S32205 Studs Bolt
nut fastners
Duplex 2205 / UNS S32205 Nut
washer fastner
Duplex 2205 / UNS S32205 Washer

Duplex 2205 / UNS S32205 Fasteners Specification

SpecificationsASTM A479, A182 / ASME SA479, SA182
StandardDIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Fasteners Length3 mm - 200 mm | Custom Sizes
Nuts SizeM3 - M56 | 3/6" to 2" | Custom Sizes
Washers SizeM3 - M56 | 3/6" to 2" | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads availableUNF, BSW, BSF, METRIC, UNC, or as required
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Surface TreatmentPassivation /plain
Others FactorOEM, ODM, ±0.03MM tolerance
Manufacturing ProcessWire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
PackingIN BULK: carton, pallet, Small Boxes or customer request
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks
Place of OriginIndia

Equivalent Grades Duplex 2205 / UNS S32205 Fasteners

STANDARDUNSWNR.
Duplex Steel 2205S322051.4462

Chemical Composition Duplex 2205 / UNS S32205 Fasteners

Common NameC%Mn%Si%P%S%Cr%Ni%Mo%N%
S322050.0302.001.000.0300.02022.0-23.04.5-6.53.0-3.50.14-0.20

Mechanical Properties Duplex 2205 / UNS S32205 Fasteners

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %

Dimensions Of Duplex 2205 / UNS S32205 Fasteners

Duplex Steel S32205 Bolts Dimensions Chart :

Hex Bolts Dimensions
All dimensions are in mm unless mentioned otherwise
Nominal Size
or Basic
Product
Diameter

Full-Size Body
Diameter,
E
Width Across Flats,
F
Width Across
Corners, G
Head Height, H BasicRadius of
Fillet, R
Nominal Thread
Length for Bolt
Lengths,
LT
inchmmMaxMinBasic
inch
MaxMinMaxMinBasic
inch
MaxMinMaxMin6 in. and
Shoter
Over
6 in.
1⁄40.250.260.2377⁄160.4380.4250.5050.48411⁄640.1880.150.030.010.751
5⁄160.31250.3240.2981⁄20.50.4840.5770.5527⁄320.2350.1950.030.010.8751.125
3⁄80.3750.3880.369⁄160.5620.5440.650.621⁄40.2680.2260.030.0111.25
7⁄160.43750.4520.4215⁄80.6250.6030.7220.68719⁄640.3160.2720.030.011.1251.375
1⁄20.50.5150.4823⁄40.750.7250.8660.82611⁄320.3640.3020.030.011.251.5
5⁄80.6250.6420.60515⁄160.9380.9061.0831.03327⁄640.4440.3780.060.021.51.75
3⁄40.750.7680.72911⁄81.1251.0881.2991.241⁄20.5240.4550.060.021.752
7⁄80.8750.8950.8521 5⁄161.3121.2691.5161.44737⁄640.6040.5310.060.0222.25
111.0220.9761 1⁄21.51.451.7321.65343⁄640.70.5910.090.032.252.5
1 1⁄81.1251.1491.0981 11⁄161.6881.6311.9491.8593⁄40.780.6580.090.032.52.75
1 1⁄41.251.2771.2231 7⁄81.8751.8122.1652.06627⁄320.8760.7490.090.032.753
1 3⁄81.3751.4041.3452 1⁄162.0621.9942.3822.27329⁄320.940.810.090.0333.25
1 1⁄21.51.5311.472 1⁄42.252.1752.5982.4811.0360.9020.090.033.253.5
1 5⁄81.6251.6581.5912 7⁄162.4382.3562.8152.6161 3⁄321.1160.9780.090.033.53.75
1 3⁄41.751.7851.7162 5⁄82.6252.5383.0312.8931 5⁄321.1961.0540.120.043.754
1 7⁄81.8751.9121.8392 13⁄162.8122.7193.2483.0991 1⁄41.2761.130.120.0444.25
222.0391.964332.93.4643.3061 11⁄321.3881.1750.120.044.254.5
2 1⁄42.252.3052.2143 3⁄83.3753.2623.8973.7191 1⁄21.5481.3270.190.064.755
2 1⁄22.52.5592.4613 3⁄43.753.6254.334.1331 21⁄321.7081.4790.190.065.255.5
2 3⁄42.752.8272.7114 1⁄84.1253.9884.7634.5461 13⁄161.8691.6320.190.065.756
333.0812.9614 1⁄24.54.355.1964.95922.061.8150.190.066.256.5
3 1⁄43.253.3353.214 7⁄84.8754.7125.6295.3722 3⁄162.2511.9360.190.066.757
3 1⁄23.53.5893.4615 1⁄45.255.0756.0625.7862 5⁄162.382.0570.190.067.257.5
3 3⁄43.753.8583.7265 5⁄85.6255.4376.4956.1982 1⁄22.5722.2410.190.067.758
444.1113.975665.86.9286.6122 11⁄162.7642.4240.190.068.258.5

Duplex Steel S32205 Stud Bolts Dimensions Chart :

stud Dimensions
All dimensions are in mm unless mentioned otherwise
Nominal Size
Diameter, D
inch
Tap End Full
Thread Length,
BM
Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread
UNF Thread8UN ThreadL ≤ 1010 < L ≤ 16L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Duplex Steel S32205 Nuts Dimensions :

nut Dimensions
All dimensions are in mm unless mentioned otherwise
Nominal
Size





inch
Basic Major
Diameter of
Thread
Width Across Flats,
F
Width Across
Corners,
G
Thickness Heavy
Hex Nuts,
H
Thickness Heavy
Hex Jam Nuts,
H1
Maximum Runout of
Bearing Surface to
Thread
Axis, FIM
Heavy HEX NUTSHeavy Hex
Jam Nuts
Specified Proof load
Basic
inch
Min.MaxMin.MaxBasic
inch
Min.MaxBasic
inch
Min.MaxUp to
150,000 psi
150,000 psi
and Greater
All Strength
Levels
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.1880.0170.0110.017
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.2200.0200.0120.020
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.2520.0210.0140.021
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.2850.0220.0150.022
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.3170.0230.0160.023
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.3490.0240.0170.024
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.3810.0250.0180.025
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.4460.0270.0200.027
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.5100.0290.0220.029
11.00001 5/81.5751.6251.7961.87663/640.9561.01235/640.5190.5750.0310.0240.031
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.6390.0330.0270.033
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.7510.0350.0300.035
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.8150.0380.0330.038
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.8800.0410.0360.041
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.9440.0440.0380.044
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.0090.0480.0410.048
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.0730.0510.0440.051
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.1380.0550.0470.055
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.2510.0610.0520.061
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.5050.0680.0580.068
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.6340.0740.0640.074
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.7630.0810.0700.081
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.8760.0870.0750.087
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.0060.0940.0810.094
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.1340.1000.0870.100
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.2640.1070.0930.107

Duplex Steel S32205 Washer Dimensions :

Metric Hardened Steel Circular and Circular Clipped Washers
All dimensions are in mm unless mentioned otherwise
Nominal SizeTClipped Width E, Min.
I.D.O.D.StandardExtra Thick
[Note (1)]Max.Min.Max.Min.Max.Min.Max.Min.[Note (2)]
1214.4142725.74.63.110810.5
1618.4183432.44.63.110814
2022.5224240.44.63.110817.5
2224.5244442.44.63.410819.2
2426.5265048.44.63.410821
2730.53056S4.14.63.410823.6
3033.6336058.14.63.410826.2
3639.6397270.14.63.410831.S
4245.6458481.87.24.610836.7
4852.7529592.87.24.610842
5662.762107104.88.76.110849
6470.770118115.88.76.110856
7278.778130127.58.76.110863
8086.986142139.58.76.110870
9096.996159156.58.76.110878.7
100107.9107176173.58.76.110887.5

Different Types Of Duplex 2205 / UNS S32205 Fasteners

Different Types Of Bolts:

Hex Bolt
ASTM A182 Duplex Steel S32205 Hex Bolts
Carriage bolt
DIN 1.4410 Carriage Bolts
Stud Bolt
Duplex Steel S32205 Stud Bolts
Hex Head bolt
Duplex Steel S32205 Hex Head Bolts
Forged Hook bolt
Duplex Steel S32205 Forged Hook Bolts
Torx Bolts
Duplex Steel S32205 Torx Bolts
countersunk bolt
Duplex Steel S32205 Countersunk Bolts
Flange Head Bolts
Duplex Steel S32205 Flange Head Bolts
Allen Bolts
Duplex Steel S32205 Allen Bolts
12 point flange bolt
S32205 UNS 12-Point Flange Bolts
eye bolt
ASTM A182 UNS S32205 Eye Bolts
a2 70 stainless steel Bolts
Duplex Steel S32205 Bolts
u bolt
Duplex Steel S32205 U Bolts
J bolt
Duplex Steel S32205 J Bolts
Elevator Bolt
Duplex Steel S32205 Elevator Bolt
Threaded expansion anchor bolt
ASTM A182 Grade S32205 Threaded Expansion Anchor Bolt
High Performance anchor Bolts
ASME SA 182 High Performance Anchor Bolts
lag bolt
UNS S32205 Lag Bolts

Different Types Of Nuts:

hex nuts
ASTM A182 Duplex Steel S32205 Hex Nuts
t nut
ASME SA182 Duplex Steel S32205 T Nuts
metric nuts
Duplex Steel S32205 Metric Nuts
rivet nuts
UNS S32205 Rivet Nuts
sleeve nuts
Duplex Steel S32205 Sleeve Nuts
12 point nuts
S32205 Duplex Steel 12-Point Nuts
lug nut
ASTM A182 Duplex Steel S32205 Lug Nut
captive nuts
DIN 1.4462 Captive Nuts
domed nuts
Duplex Steel S32205 Dome Nuts
Acorn nut
ASME SA 182 Acorn Nuts
nylon nut
Duplex Steel S32205 Nyloc Nuts
Insert Nut
UNS S32205 Insert Nuts
lock nut
Duplex Steel S32205 Lock Nuts
Castle nuts
ASTM A182 UNS S32205 Castle Nuts
square nut
Duplex Steel S32205 Square Nuts

Different Types Of Washers:

plain washer
ASTM A182 Duplex Steel S32205 Plain Washer
tab washer
ASME SA182 Duplex Steel S32205 Tab Washer
spring washer
Duplex Steel S32205 Spring Washer
sealing washer
UNS S32205 Sealing Washer
lock washer
Duplex Steel S32205 Lock Washer
square washer
UNS S32205 Square Washer
flat washer
ASTM A182 Duplex Steel S32205 Flat Washer
split washer
DIN 1.4462 Split Washer
star washer
Duplex Steel S32205 Star Washer

Different Types Of Screw:

torx screw
ASTM A182 Duplex Steel S32205 Torx Screws
self drilling screw
Duplex Steel S32205 Self Drilling Screws
grub screw
DIN 1.4462 Grub Screws
countersunk screw
ASME SA182 Duplex Steel S32205 Countersunk Screws
tapping screws
Duplex Steel S32205 Self Tapping Screws
wood screw
ASTM A182 Grade S32205
Wood Screws
Roofing screw
UNS S32205 Roofing Screws

Application of Duplex 2205 / UNS S32205 Fasteners

Testing of Duplex 2205 / UNS S32205 Fasteners

Packing Of Duplex 2205 / UNS S32205 Fasteners

Destination Of Duplex 2205 / UNS S32205 Fasteners

Duplex Steel S32205 Heavy Hex Bolt Manufacturer in Chennai, Duplex S32205 Hex Nut Manufacturer in Hyderabad, Werkstoff Nr. 1.4462 Threaded Rod Exporter in Pimpri-Chinchwad, UNS S32205 Fasteners Supplier in Pune, DIN 1.4462 Hex Bolt Stockist in Ahmedabad, ASME SA182 Duplex Steel S32205 Bolt Exporter in Jamnagar, ASTM A182 Duplex S32205 Spring Washer Stockist in Bangalore, Grade S32205 Plain Washer Supplier in Coimbatore.
UNS S32205 Stud Bolt Supplier in Malaysia, Grade S32205 Fasteners Supplier in Dubai, Werkstoff Nr. 1.4462 Plain Washer Stockist in Singapore, Duplex Steel S32205 Heavy Hex Bolt Supplier in Nigeria, ASTM A182 Duplex S32205 Hex Bolt Stockist in Brazil, DIN 1.4462 Threaded Rod Manufacturer in South Africa, Duplex S32205 Bolt Manufacturer in Tanzania, UNS S32205 Fasteners Exporter in UAE, Duplex Steel S32205 U Bolt Manufacturer in Indonesia, DIN 1.4462 Threaded Rod Stockist in Saudi Arabia, Werkstoff Nr. 1.4462 Spring Washer Exporter in Qatar, ASME SA182 Duplex Steel S32205 Hex Nut Exporter in Argentina.
Werkstoff Nr. 1.4462 Nut Weight Calculator, Duplex S32205 Stud Bolt Price List, ASME SA182 Duplex Steel S32205 Threaded Rod Specification, a Wide range of Grade S32205 Hex Nut, Duplex S32205 Bolt Price List in India, DIN 1.4462 Fasteners Catalogue, Grade S32205 U Bolt Price Per Kg, DIN 1.4462 Hex Nut at Factory Price, UNS S32205 Heavy Hex Bolt Weight Chart, ASTM A182 Duplex S32205 Heavy Hex Nut at Factory Price, Best Quality of Duplex S32205 Plain Washer, Duplex Steel S32205 Plain Washer Grade Chart.