Incoloy 825 Fasteners
UNS N08825 Threaded Rod, ASTM B425 Incoloy 825 Bolt, Werkstoff Nr. 2.4858 Fasteners, Incoloy 825 Fasteners, Incoloy 825 Plain Washer, Din 2.4858 Stud Bolt, ASME SB425 Grade 825 Heavy Hex Nut.
fas10 is a well-known maker of Incoloy 825 fasteners. These fasteners are constructed from a chromium-iron nickel alloy containing copper and molybdenum. We provide the same product in various iterations, including Incoloy 825 Nuts, Inconel 825 Bolts, Inconel 825 Washers, and Inconel 825 Stud Bolts. These nuts and bolts are made of an alloy that combines nickel, iron, and chromium with titanium, copper, and molybdenum. Incoloy UNS N08825 fasteners are high nickel alloy fasteners resistant to high temperatures. These fasteners may be fabricated into a range of different products.
Inconel alloys, often known as super alloys, are nickel-based alloys with high resistance to corrosion, oxidation, carburization, pitting, cracks, corrosion cracking, and high-temperature strength. Inconel 825 screws are manufactured from a nickel-iron-chromium alloy that incorporates molybdenum and copper into its composition. To ensure that each piece of ASTM B425 Incoloy 825 Bolt has a long life and resistance to corrosion of the highest quality, they are produced using high-grade steel.
![industrial](https://www.fas10.in/wp-content/uploads/2022/06/industrial.gif)
![stainless steel 904l fasteners](https://www.fas10.in/wp-content/uploads/2022/07/stainless-steel-904l-fasteners.jpg)
About Incoloy 825 Fasteners
UNS N08825 Heavy Hex Bolt, Werkstoff Nr. 2.4858 U Bolt, AISI 825 Hex Nut, Grade 825 Hex Bolt, Din 2.4858 Nut, Grade 825 Threaded Rod, Incoloy 825 Spring Washer.
Inconel Din 2.4858 fasteners prevent localized attacks from reducing and oxidizing acids, stress-corrosion cracking, pitting and pitting corrosion, and various environmental conditions. The alloy 825 has an extraordinary resistance to corrosion caused by sulfuric and phosphoric acids, and it is often the most cost-effective alloy for use in services involving sulfuric acid. The chemical composition of Incoloy 825 offers good resistance to various corrosive conditions, including pitting, pitting corrosion, intergranular corrosion, and stress-corrosion cracking. We provide competitive pricing on purchases of Alloy 825 Fasteners made by our company.
Types Of Incoloy 825 Fasteners
Incoloy 825 Fasteners Specification
Specifications | ASTM B425 / ASME SB425 |
Standard | DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
Fasteners Length | 3 mm - 200 mm | Custom Sizes |
Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
Surface Treatment | Passivation /plain |
Others Factor | OEM, ODM, ±0.03MM tolerance |
Manufacturing Process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
Packing | IN BULK: carton, pallet, Small Boxes or customer request |
Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Certification | Dual Certified As per ASTM & ASME Codes |
Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
Place of Origin | India |
Equivalent Grades Incoloy 825 Fasteners
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Chemical Composition Incoloy 825 Fasteners
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Mechanical Properties Incoloy 825 Fasteners
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Dimensions Of Incoloy 825 Fasteners
Incoloy 825 Bolts Dimensions Chart :
![Hex Bolts Dimensions](https://www.fas10.in/wp-content/uploads/2022/07/Hex-Bolts-Dimensions.png)
Nominal Size or Basic Product Diameter | Full-Size Body Diameter, E | Width Across Flats, F | Width Across Corners, G | Head Height, H Basic | Radius of Fillet, R | Nominal Thread Length for Bolt Lengths, LT |
|||||||||
inch | mm | Max | Min | Basic inch | Max | Min | Max | Min | Basic inch | Max | Min | Max | Min | 6 in. and Shoter | Over 6 in. |
1⁄4 | 0.25 | 0.26 | 0.237 | 7⁄16 | 0.438 | 0.425 | 0.505 | 0.484 | 11⁄64 | 0.188 | 0.15 | 0.03 | 0.01 | 0.75 | 1 |
5⁄16 | 0.3125 | 0.324 | 0.298 | 1⁄2 | 0.5 | 0.484 | 0.577 | 0.552 | 7⁄32 | 0.235 | 0.195 | 0.03 | 0.01 | 0.875 | 1.125 |
3⁄8 | 0.375 | 0.388 | 0.36 | 9⁄16 | 0.562 | 0.544 | 0.65 | 0.62 | 1⁄4 | 0.268 | 0.226 | 0.03 | 0.01 | 1 | 1.25 |
7⁄16 | 0.4375 | 0.452 | 0.421 | 5⁄8 | 0.625 | 0.603 | 0.722 | 0.687 | 19⁄64 | 0.316 | 0.272 | 0.03 | 0.01 | 1.125 | 1.375 |
1⁄2 | 0.5 | 0.515 | 0.482 | 3⁄4 | 0.75 | 0.725 | 0.866 | 0.826 | 11⁄32 | 0.364 | 0.302 | 0.03 | 0.01 | 1.25 | 1.5 |
5⁄8 | 0.625 | 0.642 | 0.605 | 15⁄16 | 0.938 | 0.906 | 1.083 | 1.033 | 27⁄64 | 0.444 | 0.378 | 0.06 | 0.02 | 1.5 | 1.75 |
3⁄4 | 0.75 | 0.768 | 0.729 | 11⁄8 | 1.125 | 1.088 | 1.299 | 1.24 | 1⁄2 | 0.524 | 0.455 | 0.06 | 0.02 | 1.75 | 2 |
7⁄8 | 0.875 | 0.895 | 0.852 | 1 5⁄16 | 1.312 | 1.269 | 1.516 | 1.447 | 37⁄64 | 0.604 | 0.531 | 0.06 | 0.02 | 2 | 2.25 |
1 | 1 | 1.022 | 0.976 | 1 1⁄2 | 1.5 | 1.45 | 1.732 | 1.653 | 43⁄64 | 0.7 | 0.591 | 0.09 | 0.03 | 2.25 | 2.5 |
1 1⁄8 | 1.125 | 1.149 | 1.098 | 1 11⁄16 | 1.688 | 1.631 | 1.949 | 1.859 | 3⁄4 | 0.78 | 0.658 | 0.09 | 0.03 | 2.5 | 2.75 |
1 1⁄4 | 1.25 | 1.277 | 1.223 | 1 7⁄8 | 1.875 | 1.812 | 2.165 | 2.066 | 27⁄32 | 0.876 | 0.749 | 0.09 | 0.03 | 2.75 | 3 |
1 3⁄8 | 1.375 | 1.404 | 1.345 | 2 1⁄16 | 2.062 | 1.994 | 2.382 | 2.273 | 29⁄32 | 0.94 | 0.81 | 0.09 | 0.03 | 3 | 3.25 |
1 1⁄2 | 1.5 | 1.531 | 1.47 | 2 1⁄4 | 2.25 | 2.175 | 2.598 | 2.48 | 1 | 1.036 | 0.902 | 0.09 | 0.03 | 3.25 | 3.5 |
1 5⁄8 | 1.625 | 1.658 | 1.591 | 2 7⁄16 | 2.438 | 2.356 | 2.815 | 2.616 | 1 3⁄32 | 1.116 | 0.978 | 0.09 | 0.03 | 3.5 | 3.75 |
1 3⁄4 | 1.75 | 1.785 | 1.716 | 2 5⁄8 | 2.625 | 2.538 | 3.031 | 2.893 | 1 5⁄32 | 1.196 | 1.054 | 0.12 | 0.04 | 3.75 | 4 |
1 7⁄8 | 1.875 | 1.912 | 1.839 | 2 13⁄16 | 2.812 | 2.719 | 3.248 | 3.099 | 1 1⁄4 | 1.276 | 1.13 | 0.12 | 0.04 | 4 | 4.25 |
2 | 2 | 2.039 | 1.964 | 3 | 3 | 2.9 | 3.464 | 3.306 | 1 11⁄32 | 1.388 | 1.175 | 0.12 | 0.04 | 4.25 | 4.5 |
2 1⁄4 | 2.25 | 2.305 | 2.214 | 3 3⁄8 | 3.375 | 3.262 | 3.897 | 3.719 | 1 1⁄2 | 1.548 | 1.327 | 0.19 | 0.06 | 4.75 | 5 |
2 1⁄2 | 2.5 | 2.559 | 2.461 | 3 3⁄4 | 3.75 | 3.625 | 4.33 | 4.133 | 1 21⁄32 | 1.708 | 1.479 | 0.19 | 0.06 | 5.25 | 5.5 |
2 3⁄4 | 2.75 | 2.827 | 2.711 | 4 1⁄8 | 4.125 | 3.988 | 4.763 | 4.546 | 1 13⁄16 | 1.869 | 1.632 | 0.19 | 0.06 | 5.75 | 6 |
3 | 3 | 3.081 | 2.961 | 4 1⁄2 | 4.5 | 4.35 | 5.196 | 4.959 | 2 | 2.06 | 1.815 | 0.19 | 0.06 | 6.25 | 6.5 |
3 1⁄4 | 3.25 | 3.335 | 3.21 | 4 7⁄8 | 4.875 | 4.712 | 5.629 | 5.372 | 2 3⁄16 | 2.251 | 1.936 | 0.19 | 0.06 | 6.75 | 7 |
3 1⁄2 | 3.5 | 3.589 | 3.461 | 5 1⁄4 | 5.25 | 5.075 | 6.062 | 5.786 | 2 5⁄16 | 2.38 | 2.057 | 0.19 | 0.06 | 7.25 | 7.5 |
3 3⁄4 | 3.75 | 3.858 | 3.726 | 5 5⁄8 | 5.625 | 5.437 | 6.495 | 6.198 | 2 1⁄2 | 2.572 | 2.241 | 0.19 | 0.06 | 7.75 | 8 |
4 | 4 | 4.111 | 3.975 | 6 | 6 | 5.8 | 6.928 | 6.612 | 2 11⁄16 | 2.764 | 2.424 | 0.19 | 0.06 | 8.25 | 8.5 |
Incoloy 825 Stud Bolts Dimensions Chart :
![stud Dimensions](https://www.fas10.in/wp-content/uploads/2022/07/stud-Dimensions.png)
Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 < L ≤ 16 | L > 16 | |
1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Incoloy 825 Nuts Dimensions :
![nut Dimensions](https://www.fas10.in/wp-content/uploads/2022/07/nut-Dimensions.png)
Nominal Size inch | Basic Major Diameter of Thread | Width Across Flats, F | Width Across Corners, G | Thickness Heavy Hex Nuts, H | Thickness Heavy Hex Jam Nuts, H1 | Maximum Runout of Bearing Surface to Thread Axis, FIM |
|||||||||
Heavy HEX NUTS | Heavy Hex Jam Nuts |
||||||||||||||
Specified Proof load | |||||||||||||||
Basic inch | Min. | Max | Min. | Max | Basic inch | Min. | Max | Basic inch | Min. | Max | Up to 150,000 psi | 150,000 psi and Greater | All Strength Levels |
||
1/4 | 0.2500 | 1/2 | 0.488 | 0.500 | 0.556 | 0.577 | 15/64 | 0.218 | 0.250 | 11/64 | 0.156 | 0.188 | 0.017 | 0.011 | 0.017 |
5/16 | 0.3125 | 9/16 | 0.546 | 0.562 | 0.622 | 0.650 | 19/64 | 0.280 | 0.314 | 13/64 | 0.186 | 0.220 | 0.020 | 0.012 | 0.020 |
3/8 | 0.3750 | 11/16 | 0.669 | 0.688 | 0.763 | 0.794 | 23/64 | 0.341 | 0.377 | 15/64 | 0.216 | 0.252 | 0.021 | 0.014 | 0.021 |
7/16 | 0.4375 | 3/4 | 0.728 | 0.750 | 0.830 | 0.866 | 27/64 | 0.403 | 0.441 | 17/64 | 0.247 | 0.285 | 0.022 | 0.015 | 0.022 |
1/2 | 0.5000 | 7/8 | 0.850 | 0.875 | 0.969 | 1.010 | 31/64 | 0.464 | 0.504 | 19/64 | 0.277 | 0.317 | 0.023 | 0.016 | 0.023 |
9/16 | 0.5625 | 15/16 | 0.909 | 0.938 | 1.037 | 1.083 | 35/64 | 0.526 | 0.568 | 21/64 | 0.307 | 0.349 | 0.024 | 0.017 | 0.024 |
5/8 | 0.6250 | 1 1/16 | 1.031 | 1.062 | 1.175 | 1.227 | 39/64 | 0.587 | 0.631 | 23/64 | 0.337 | 0.381 | 0.025 | 0.018 | 0.025 |
3/4 | 0.7500 | 1 1/4 | 1.212 | 1.250 | 1.382 | 1.443 | 47/64 | 0.710 | 0.758 | 27/64 | 0.398 | 0.446 | 0.027 | 0.020 | 0.027 |
7/8 | 0.8750 | 1 7/16 | 1.394 | 1.438 | 1.589 | 1.660 | 55/64 | 0.833 | 0.885 | 31/64 | 0.458 | 0.510 | 0.029 | 0.022 | 0.029 |
1 | 1.0000 | 1 5/8 | 1.575 | 1.625 | 1.796 | 1.876 | 63/64 | 0.956 | 1.012 | 35/64 | 0.519 | 0.575 | 0.031 | 0.024 | 0.031 |
1 1/8 | 1.1250 | 1 13/16 | 1.756 | 1.812 | 2.002 | 2.093 | 1 7/64 | 1.079 | 1.139 | 39/64 | 0.579 | 0.639 | 0.033 | 0.027 | 0.033 |
1 1/4 | 1.2500 | 2 | 1.938 | 2.000 | 2.209 | 2.309 | 1 7/32 | 1.187 | 1.251 | 23/32 | 0.687 | 0.751 | 0.035 | 0.030 | 0.035 |
1 3/8 | 1.3750 | 2 3/16 | 2.119 | 2.188 | 2.416 | 2.526 | 1 11/32 | 1.310 | 1.378 | 25/32 | 0.747 | 0.815 | 0.038 | 0.033 | 0.038 |
1 1/2 | 1.5000 | 2 3/8 | 2.300 | 2.375 | 2.622 | 2.742 | 1 15/32 | 1.433 | 1.505 | 27/32 | 0.808 | 0.880 | 0.041 | 0.036 | 0.041 |
1 5/8 | 1.6250 | 2 9/16 | 2.481 | 2.562 | 2.828 | 2.959 | 1 19/32 | 1.556 | 1.632 | 29/32 | 0.868 | 0.944 | 0.044 | 0.038 | 0.044 |
1 3/4 | 1.7500 | 2 3/4 | 2.662 | 2.750 | 3.035 | 3.175 | 1 23/32 | 1.679 | 1.759 | 31/32 | 0.929 | 1.009 | 0.048 | 0.041 | 0.048 |
1 7/8 | 1.8750 | 2 15/16 | 2.844 | 2.938 | 3.242 | 3.392 | 1 27/32 | 1.802 | 1.886 | 1 1/32 | 0.989 | 1.073 | 0.051 | 0.044 | 0.051 |
2 | 2.0000 | 3 1/8 | 3.025 | 3.125 | 3.449 | 3.608 | 1 31/32 | 1.925 | 2.013 | 1 3/32 | 1.050 | 1.138 | 0.055 | 0.047 | 0.055 |
2 1/4 | 2.2500 | 3 1/2 | 3.388 | 3.500 | 3.862 | 4.041 | 2 13/64 | 2.155 | 2.251 | 1 13/64 | 1.155 | 1.251 | 0.061 | 0.052 | 0.061 |
2 1/2 | 2.5000 | 3 7/8 | 3.750 | 3.875 | 4.275 | 4.474 | 2 29/64 | 2.401 | 2.505 | 1 29/64 | 1.401 | 1.505 | 0.068 | 0.058 | 0.068 |
2 3/4 | 2.7500 | 4 1/4 | 4.112 | 4.250 | 4.688 | 4.907 | 2 45/64 | 2.647 | 2.759 | 1 37/64 | 1.522 | 1.634 | 0.074 | 0.064 | 0.074 |
3 | 3.0000 | 4 5/8 | 4.475 | 4.625 | 5.102 | 5.340 | 2 61/64 | 2.893 | 3.013 | 1 45/64 | 1.643 | 1.763 | 0.081 | 0.070 | 0.081 |
3 1/4 | 3.2500 | 5 | 4.838 | 5.000 | 5.515 | 5.774 | 3 3/16 | 3.124 | 3.252 | 1 13/16 | 1.748 | 1.876 | 0.087 | 0.075 | 0.087 |
3 1/2 | 3.5000 | 5 3/8 | 5.200 | 5.375 | 5.928 | 6.207 | 3 7/16 | 3.370 | 3.506 | 1 15/16 | 1.870 | 2.006 | 0.094 | 0.081 | 0.094 |
3 3/4 | 3.7500 | 5 3/4 | 5.562 | 5.750 | 6.341 | 6.640 | 3 11/16 | 3.616 | 3.760 | 2 1/16 | 1.990 | 2.134 | 0.100 | 0.087 | 0.100 |
4 | 4.0000 | 6 1/8 | 5.925 | 6.125 | 6.755 | 7.073 | 3 15/16 | 3.862 | 4.014 | 2 3/16 | 2.112 | 2.264 | 0.107 | 0.093 | 0.107 |
Incoloy 825 Washer Dimensions Chart :
![Metric Hardened Steel Circular and Circular Clipped Washers](https://www.fas10.in/wp-content/uploads/2022/08/Metric-Hardened-Steel-Circular-and-Circular-Clipped-Washers.jpeg)
Nominal Size | T | Clipped Width E, Min. | ||||||||||||
I.D. | O.D. | Standard | Extra Thick | |||||||||||
[Note (1)] | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | [Note (2)] | |||||
12 | 14.4 | 14 | 27 | 25.7 | 4.6 | 3.1 | 10 | 8 | 10.5 | |||||
16 | 18.4 | 18 | 34 | 32.4 | 4.6 | 3.1 | 10 | 8 | 14 | |||||
20 | 22.5 | 22 | 42 | 40.4 | 4.6 | 3.1 | 10 | 8 | 17.5 | |||||
22 | 24.5 | 24 | 44 | 42.4 | 4.6 | 3.4 | 10 | 8 | 19.2 | |||||
24 | 26.5 | 26 | 50 | 48.4 | 4.6 | 3.4 | 10 | 8 | 21 | |||||
27 | 30.5 | 30 | 56 | S4.1 | 4.6 | 3.4 | 10 | 8 | 23.6 | |||||
30 | 33.6 | 33 | 60 | 58.1 | 4.6 | 3.4 | 10 | 8 | 26.2 | |||||
36 | 39.6 | 39 | 72 | 70.1 | 4.6 | 3.4 | 10 | 8 | 31.S | |||||
42 | 45.6 | 45 | 84 | 81.8 | 7.2 | 4.6 | 10 | 8 | 36.7 | |||||
48 | 52.7 | 52 | 95 | 92.8 | 7.2 | 4.6 | 10 | 8 | 42 | |||||
56 | 62.7 | 62 | 107 | 104.8 | 8.7 | 6.1 | 10 | 8 | 49 | |||||
64 | 70.7 | 70 | 118 | 115.8 | 8.7 | 6.1 | 10 | 8 | 56 | |||||
72 | 78.7 | 78 | 130 | 127.5 | 8.7 | 6.1 | 10 | 8 | 63 | |||||
80 | 86.9 | 86 | 142 | 139.5 | 8.7 | 6.1 | 10 | 8 | 70 | |||||
90 | 96.9 | 96 | 159 | 156.5 | 8.7 | 6.1 | 10 | 8 | 78.7 | |||||
100 | 107.9 | 107 | 176 | 173.5 | 8.7 | 6.1 | 10 | 8 | 87.5 |
Different Types Of Incoloy 825 Fasteners
Different Types Of Bolts:
![Hex Bolt](https://www.fas10.in/wp-content/uploads/2022/07/Hex-Bolt.jpg)
ASTM B564 Incoloy 825 Hex Bolts
![Carriage bolt](https://www.fas10.in/wp-content/uploads/2022/07/Carriage-bolt.jpg)
DIN 2.4858 Carriage Bolts
![Stud Bolt](https://www.fas10.in/wp-content/uploads/2022/09/Stud-Bolt.jpg)
Incoloy 825 Stud Bolts
![Hex Head bolt](https://www.fas10.in/wp-content/uploads/2022/07/Hex-Head-bolt.jpg)
UNS N08825 Hex Head Bolts
![Forged Hook bolt](https://www.fas10.in/wp-content/uploads/2022/07/Forged-Hook-bolt.jpg)
Incoloy 825 Forged Hook Bolts
![Torx Bolts](https://www.fas10.in/wp-content/uploads/2022/07/Torx-Bolts.jpg)
DIN 2.4858 Torx Bolts
![countersunk bolt](https://www.fas10.in/wp-content/uploads/2022/07/countersunk-bolt.jpg)
Incoloy 825 Countersunk Bolts
![Flange Head Bolts](https://www.fas10.in/wp-content/uploads/2022/07/Flange-Head-Bolts.jpg)
DIN 2.4858 Flange Head Bolts
![Allen Bolts](https://www.fas10.in/wp-content/uploads/2022/07/Allen-Bolts.jpg)
UNS N08825 Allen Bolts
![12 point flange bolt](https://www.fas10.in/wp-content/uploads/2022/07/12-point-flange-bolt.jpg)
N08825 UNS 12-Point Flange Bolts
![eye bolt](https://www.fas10.in/wp-content/uploads/2022/07/eye-bolt.jpg)
ASTM B564 UNS N08825 Eye Bolts
![a2 70 stainless steel Bolts](https://www.fas10.in/wp-content/uploads/2022/07/a2-70-stainless-steel-Bolts.jpg)
DIN 2.4858 Bolts
![u bolt](https://www.fas10.in/wp-content/uploads/2022/07/u-bolt.jpg)
AISI Incoloy 825 U Bolts
![J bolt](https://www.fas10.in/wp-content/uploads/2022/07/J-bolt.jpg)
Incoloy 825 J Bolts
![Elevator Bolt](https://www.fas10.in/wp-content/uploads/2022/07/Elevator-Bolt.jpg)
UNS N08825 Elevator Bolt
![Threaded expansion anchor bolt](https://www.fas10.in/wp-content/uploads/2022/07/Threaded-expansion-anchor-bolt.jpg)
ASTM B564 Grade 825 Threaded Expansion Anchor Bolt
![High Performance anchor Bolts](https://www.fas10.in/wp-content/uploads/2022/07/High-Performance-anchor-Bolts.jpg)
ASME SB 564 Incoloy 825 High Performance Anchor Bolts
![lag bolt](https://www.fas10.in/wp-content/uploads/2022/07/lag-bolt.jpg)
UNS N08825 Lag Bolts
Different Types Of Nuts:
![hex nuts](https://www.fas10.in/wp-content/uploads/2022/07/hex-nuts.jpg)
ASTM B564 Incoloy 825 Hex Nuts
![t nut](https://www.fas10.in/wp-content/uploads/2022/07/t-nut.jpg)
ASME SB564 Incoloy 825 T Nuts
![metric nuts](https://www.fas10.in/wp-content/uploads/2022/07/metric-nuts.jpg)
Incoloy 825 Metric Nuts
![rivet nuts](https://www.fas10.in/wp-content/uploads/2022/07/rivet-nuts.jpg)
UNS N08825 Rivet Nuts
![sleeve nuts](https://www.fas10.in/wp-content/uploads/2022/07/sleeve-nuts.jpg)
825 Incoloy Sleeve Nuts
![12 point nuts](https://www.fas10.in/wp-content/uploads/2022/07/12-point-nuts.jpg)
825 Incoloy 12-Point Nuts
![lug nut](https://www.fas10.in/wp-content/uploads/2022/07/lug-nut.jpg)
ASTM B564 Grade 825 Lug Nut
![captive nuts](https://www.fas10.in/wp-content/uploads/2022/07/captive-nuts.jpg)
DIN 2.4858 Captive Nuts
![domed nuts](https://www.fas10.in/wp-content/uploads/2022/07/domed-nuts.jpg)
Incoloy 825 Dome Nuts
![Acorn nut](https://www.fas10.in/wp-content/uploads/2022/07/Acorn-nut.jpg)
ASME SB 564 Incoloy 825 Acorn Nuts
![nylon nut](https://www.fas10.in/wp-content/uploads/2022/07/nylon-nut.jpg)
Incoloy 825 Nyloc Nuts
![Insert Nut](https://www.fas10.in/wp-content/uploads/2022/07/Insert-Nut.jpg)
UNS N08825 Insert Nuts
![lock nut](https://www.fas10.in/wp-content/uploads/2022/07/lock-nut.jpg)
825 Incoloy Lock Nuts
![Castle nuts](https://www.fas10.in/wp-content/uploads/2022/07/Castle-nuts.jpg)
ASTM B564 UNS N08825 Castle Nuts
![square nut](https://www.fas10.in/wp-content/uploads/2022/07/square-nut.jpg)
AISI 825 Square Nuts
Different Types Of Washers:
![plain washer](https://www.fas10.in/wp-content/uploads/2022/07/plain-washer.jpg)
ASTM B564 Incoloy 825 Plain Washer
![tab washer](https://www.fas10.in/wp-content/uploads/2022/07/tab-washer.jpg)
ASME SB564 Incoloy 825 Tab Washer
![spring washer](https://www.fas10.in/wp-content/uploads/2022/07/spring-washer.jpg)
Incoloy 825 Spring Washer
![sealing washer](https://www.fas10.in/wp-content/uploads/2022/07/sealing-washer.jpg)
UNS N08825 Sealing Washer
![lock washer](https://www.fas10.in/wp-content/uploads/2022/07/lock-washer.jpg)
Incoloy 825 Lock Washer
![square washer](https://www.fas10.in/wp-content/uploads/2022/07/square-washer.jpg)
UNS N08825 Square Washer
![flat washer](https://www.fas10.in/wp-content/uploads/2022/07/flat-washer.jpg)
ASTM B564 Grade 825 Flat Washer
![split washer](https://www.fas10.in/wp-content/uploads/2022/07/split-washer.jpg)
DIN 2.4858 Split Washer
![star washer](https://www.fas10.in/wp-content/uploads/2022/07/star-washer.jpg)
Incoloy 825 Star Washer
Different Types Of Screw:
![torx screw](https://www.fas10.in/wp-content/uploads/2022/07/torx-screw.jpg)
ASTM B564 Incoloy 825 Torx Screws
![self drilling screw](https://www.fas10.in/wp-content/uploads/2022/07/self-drilling-screw.jpg)
Incoloy 825 Self Drilling Screws
![grub screw](https://www.fas10.in/wp-content/uploads/2022/07/grub-screw.jpg)
DIN 2.4858 Grub Screws
![countersunk screw](https://www.fas10.in/wp-content/uploads/2022/07/countersunk-screw.jpg)
ASME SB564 Incoloy 825 Countersunk Screws
![tapping screws](https://www.fas10.in/wp-content/uploads/2022/07/tapping-screws.jpg)
Incoloy 825 Self Tapping
Screws
![wood screw](https://www.fas10.in/wp-content/uploads/2022/07/wood-screw.jpg)
ASTM B564 Grade 825
Wood Screws
![Roofing screw](https://www.fas10.in/wp-content/uploads/2022/07/Roofing-screw.jpg)