Stainless Steel 316 Stud Bolt

ASME SA193 SS 316 Tap End Stud Bolt, SS 316 Double End Threaded Rod, Din 1.4401 Half Threaded Rod, Werkstoff Nr. 1.4401 Tap End Threaded Rod, Stainless Steel 316 Double End Stud Bolt, UNS S31600 Full Threaded Stud Bolt.

Stainless Steel 316 Stud Bolt is a type of mechanical fastener that does not have a head but instead has external threads. the entire length of the stud is threaded with the external thread, or the stud is just partially threaded from either end.

In order to assemble the connection, it requires at least two nuts, one for each side. Many options are available in stud bolts including sizes, types and threading patterns. the size of the stud bolt can range from 3 mm to 100 mm. In terms of diameter and it goes up to a maximum of four inches.
The SS 316 Double End Threaded Rod are more resistant to corrosion and can be utilised in applications where the environment is extremely corrosive. The astm a193 specification includes a variety of grades and classes, including b7, b8, and b8m. These grades can be further broken down into subcategories.
industrial
ss 316 stud bolt

About Stainless Steel 316 Stud Bolt

ASTM A193 Stainless Steel 316 Full Threaded Rod, Din 1.4401 Half Threaded Stud Bolt, ASME SA193 SS 316 Double End Stud Bolt With Reduced Shank, Din 1.4401 Bonding Stud Bolt, Stainless Steel 316 Flange Stud Bolt.

Werkstoff Nr. 1.4401 Tap End Threaded Rod offer excellent endurance, can be shaped into a range of different forms, and do not require annealing before being used. It is required that stainless steel 316l stud bolts be heat treated to a lower stress-relieving temperature of no more than 400 degrees celsius.
This stud bolts will typically be the superior choice in terms of cost-effectiveness over the long run. In addition to increasing the resistance to corrosion, the inclusion of nickel also makes the material far simpler to press and draw.
The higher amount of nickel content in UNS S31600 Full Threaded Stud Bolt gives it a brighter finish, in addition to making the flatware a little more durable. content of nickel makes it more resistant to corrosion. it is mostly used in Heat exchangers, chemical containers, pipelines and the brewing industry.

Stainless Steel 316 Stud Bolt Specification

SpecificationsASTM A 193 / ASME SA 193
StandardDIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Stud Bolt Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads availableUNF, BSW, BSF, METRIC, UNC, or as required
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Surface TreatmentPassivation /plain
Others FactorOEM, ODM, ±0.03MM tolerance
Manufacturing ProcessWire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
PackingIN BULK: carton, pallet, Small Boxes or customer request
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks
Place of OriginIndia

Equivalent Grades Stainless Steel 316 Stud Bolt

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
SS 3161.4401S31600SUS 316316S31–Z7CND17‐11‐02X5CrNiMo17-12-2

Chemical Composition Stainless Steel 316 Stud Bolt

GradeCMnSiPSCrMoNiFe
SS 3160.08 max2.0 max1.0 max0.045 max0.030 max16.00 - 18.002.00 - 3.0011.00 - 14.0067.845 min

Mechanical Properties Stainless Steel 316 Stud Bolt

GradeDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
SS 3168.0 g/cm31400 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Dimensions Of Stainless Steel 316 Stud Bolt

Stainless Steel 316 Stud Bolts Dimensions Chart :

Continuous Thread Studs
Tap End Studs (1.5D Engagement)
Clamping Type Studs
Length Tolerances — LT for Continuous Thread and Clamping Type Studs, and L for Tap End Studs
Double End Studs
stud Dimensions
All dimensions are in mm unless mentioned otherwise
Nominal Size
Diameter, D
inch		Tap End Full
Thread Length,
BM		Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread		UNF Thread8UN ThreadL ≤ 1010 < L ≤ 16L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Different Types Of Stainless Steel 316 Stud Bolt

Different Types Of Stud Bolts:

Full Threaded Stud Bolt
ASTM A193 SS316 Full Threaded Stud Bolt
Bonding Stud Bolt Flange Stud Bolts
Alloy 316 Bonding Stud Bolt / Flange Stud Bolts
Double End Stud Bolts with Reduced Shank
SS 316 Double End Stud Bolts with Reduced Shank
Dowel Screw type Stud Bolt
SS 316 Dowel Screw type Stud Bolt
Half Threaded Stud Bolt
DIN 1.4401 Half Threaded Stud Bolt
tap end stud bolts
UNS S31600 Tap End Stud Bolt
Double End Stud Bolt
316 SS Double End Stud Bolt
Clinch Stud Bolt
SS 316 Clinch Stud Bolt
Weld Stud Bolt
316 Stainless Steel Weld Stud Bolt

Application of Stainless Steel 316 Stud Bolt

Testing of Stainless Steel 316 Stud Bolt

Packing Of Stainless Steel 316 Stud Bolt

Destination Of Stainless Steel 316 Stud Bolt

UNS S31600 Tap End Threaded Rod Manufacturer in Hyderabad, ASME SA193 SS 316 Half Threaded Rod Supplier in Chennai, Stainless Steel 316 Full Threaded Stud Bolt Exporter in Jamnagar, Werkstoff Nr. 1.4401 Tap End Stud Bolt Stockist in Coimbatore, SS 316 Double End Stud Bolt Exporter in Ahmedabad, ASTM A193 Stainless Steel 316 Double End Threaded Rod Manufacturer in Pune, Full Threaded Rod Supplier in Bangalore, Din 1.4401 Half Threaded Stud Bolt Stockist in Pimpri-Chinchwad.
UNS S31600 Double End Stud Bolt With Reduced Shank Supplier in Argentina, ASME SA193 SS 316 Full Threaded Rod Supplier in Qatar, SS 316 Half Threaded Stud Bolt Exporter in Tanzania, ASTM A193 SS 316 Double End Threaded Rod Supplier in Malaysia, Stainless Steel 316 Half Threaded Rod Exporter in Saudi Arabia, UNS S31600 Tap End Threaded Rod Manufacturer in Nigeria, Din 1.4401 Tap End Stud Bolt Stockist in Dubai, Din 1.4401 Bonding Stud Bolt Stockist in Singapore.
Stainless Steel 316 Full Threaded Rod Price List in India, a Wide range of ASTM A193 SS 316 Double End Threaded Rod, Best Quality of UNS S31600 Flange Stud Bolt, Din 1.4401 Full Threaded Stud Bolt Weight Chart, Din 1.4401 Bonding Stud Bolt Specification, ASME SA193 SS 316 Half Threaded Rod Weight Calculator, Werkstoff Nr. 1.4401 Double End Stud Bolt Catalogue, SS 316 Tap End Threaded Rod at Factory Price, SS 316 Double End Threaded Rod Grade Chart.
STAINLESS STEEL Stud BOLT
Stud Bolts
SERVICE DOWNLOADS