Stainless Steel 316L Fasteners

ASTM A193 Stainless Steel 316L Fasteners, Werkstoff Nr 1.4404 Threaded Rod, ASME SA193 SS 316L Stud Bolt, Din 1.4404 Bolt, UNS S31603 Nut, ASTM A193 Stainless Steel 316L Hex Bolt, Werkstoff Nr 1.4404 U Bolt, Din 1.4404 Bolt.

The addition of nitrogen to the alloy of Stainless Steel 316L Fasteners increases the alloy’s strength equal to the original alloy. Because the alloy’s carbon content has decreased, the stainless steel 316l hex head nut has the propensity to become weaker, resulting in a loss of strength in the end. After adding more stress to the alloy, a more fragile product will eventually wear out. Though the power of 316l stainless steel high tensile fasteners does not match that of the original grade 316, it is comparable to the former alloy.

Grade 316l have nitrogen added to the alloy to increase its strength compared to the base alloy. As the carbon content of the alloy decreases, ASME SA193 SS 316l Hex Head Nuts weaken, resulting in reduced strength. After high stress is applied to the alloy, a weak product will result over time. This alloy is a nitrogen-enriched grade 316 alloy.

About Stainless Steel 316L Fasteners

ASME SA193 SS 316L Fasteners Manufacturer, Din 1.4404 Bolt stockist, Stainless Steel 316L Hex Nut S31603 Supplier, ASTM A193 UNS S31603 Heavy Hex Bolt Exporter, UNS S31603 Bolt Manufacturer, SS 316L Allen Bolt Exporter.

Incorporating nitrogen into UNS S31603 Bolt not only makes them more resistant to pitting but also more resistant to corrosion. Steel suitable for use in a marine environment is sometimes referred to as marine-grade steel, and it is feasible for manufacturers to produce dual-proof grades such as 316/316l steel. Despite the difference in chemical composition, bolts and nuts made of stainless steel 316l exhibit similar properties. Therefore, the behavior of Din 1.4404 Heavy Hex Bolt is comparable to grade 316 in terms of corrosion resistance and mechanical properties.

Types Of Stainless Steel 316L Fasteners

Stainless Steel 316L Bolt

Stainless Steel 316L Studs Bolt

Stainless Steel 316L Nut

Stainless Steel 316L Washer

Stainless Steel 316L Fasteners Specification

Specifications	ASTM A 193 / ASME SA 193
Standard	DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
Size	M3 - M100 \| 3/6″ - 4″ \| Custom Sizes
Fasteners Length	3 mm - 200 mm \| Custom Sizes
Nuts Size	M3 - M56 \| 3/6" to 2" \| Custom Sizes
Washers Size	M3 - M56 \| 3/6" to 2" \| Custom Sizes
Dimensions	DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads available	UNF, BSW, BSF, METRIC, UNC, or as required
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Form	Hex, Threading, Square, Round as per Gauge Etc.
Head	Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck type	Hex, Square, Triangular, Oval & Knurled etc.
Surface Treatment	Passivation /plain
Others Factor	OEM, ODM, ±0.03MM tolerance
Manufacturing Process	Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
Packing	IN BULK: carton, pallet, Small Boxes or customer request
Surface Coating	Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
Test Certificate	As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Certification	Dual Certified As per ASTM & ASME Codes
Delivery time	Regular product : 7-15 days, Custom product : 2-4 weeks
Place of Origin	India

Equivalent Grades Stainless Steel 316L Fasteners

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316L	1.4404	S31603	SUS 316L	316S11	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2

Chemical Composition Stainless Steel 316L Fasteners

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 316L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 - 18.00	2.00 - 3.00	10.00 - 14.00	68.89 min

Mechanical Properties Stainless Steel 316L Fasteners

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 316L	8.0 g/cm3	1399 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

Dimensions Of Stainless Steel 316L Fasteners

Stainless Steel 316l Bolts Dimensions Chart :

Other Bolt & Screw Dimensions

Hex Cap Screws

Lobed Head Screws

Square Head Bolts

Hex Bolts

Heavy Hex Screw

Square Lag Screws

Heavy Hex Bolts

Hex Flange Screws

Hex Lag Screws

All dimensions are in mm unless mentioned otherwise

Nominal Size or Basic Product Diameter		Full-Size Body Diameter, E		Width Across Flats, F			Width Across Corners, G		Head Height, H Basic			Radius of Fillet, R		Nominal Thread Length for Bolt Lengths, LT
inch	mm	Max	Min	Basic inch	Max	Min	Max	Min	Basic inch	Max	Min	Max	Min	6 in. and Shoter	Over 6 in.
1⁄4	0.25	0.26	0.237	7⁄16	0.438	0.425	0.505	0.484	11⁄64	0.188	0.15	0.03	0.01	0.75	1
5⁄16	0.3125	0.324	0.298	1⁄2	0.5	0.484	0.577	0.552	7⁄32	0.235	0.195	0.03	0.01	0.875	1.125
3⁄8	0.375	0.388	0.36	9⁄16	0.562	0.544	0.65	0.62	1⁄4	0.268	0.226	0.03	0.01	1	1.25
7⁄16	0.4375	0.452	0.421	5⁄8	0.625	0.603	0.722	0.687	19⁄64	0.316	0.272	0.03	0.01	1.125	1.375
1⁄2	0.5	0.515	0.482	3⁄4	0.75	0.725	0.866	0.826	11⁄32	0.364	0.302	0.03	0.01	1.25	1.5
5⁄8	0.625	0.642	0.605	15⁄16	0.938	0.906	1.083	1.033	27⁄64	0.444	0.378	0.06	0.02	1.5	1.75
3⁄4	0.75	0.768	0.729	11⁄8	1.125	1.088	1.299	1.24	1⁄2	0.524	0.455	0.06	0.02	1.75	2
7⁄8	0.875	0.895	0.852	1 5⁄16	1.312	1.269	1.516	1.447	37⁄64	0.604	0.531	0.06	0.02	2	2.25
1	1	1.022	0.976	1 1⁄2	1.5	1.45	1.732	1.653	43⁄64	0.7	0.591	0.09	0.03	2.25	2.5
1 1⁄8	1.125	1.149	1.098	1 11⁄16	1.688	1.631	1.949	1.859	3⁄4	0.78	0.658	0.09	0.03	2.5	2.75
1 1⁄4	1.25	1.277	1.223	1 7⁄8	1.875	1.812	2.165	2.066	27⁄32	0.876	0.749	0.09	0.03	2.75	3
1 3⁄8	1.375	1.404	1.345	2 1⁄16	2.062	1.994	2.382	2.273	29⁄32	0.94	0.81	0.09	0.03	3	3.25
1 1⁄2	1.5	1.531	1.47	2 1⁄4	2.25	2.175	2.598	2.48	1	1.036	0.902	0.09	0.03	3.25	3.5
1 5⁄8	1.625	1.658	1.591	2 7⁄16	2.438	2.356	2.815	2.616	1 3⁄32	1.116	0.978	0.09	0.03	3.5	3.75
1 3⁄4	1.75	1.785	1.716	2 5⁄8	2.625	2.538	3.031	2.893	1 5⁄32	1.196	1.054	0.12	0.04	3.75	4
1 7⁄8	1.875	1.912	1.839	2 13⁄16	2.812	2.719	3.248	3.099	1 1⁄4	1.276	1.13	0.12	0.04	4	4.25
2	2	2.039	1.964	3	3	2.9	3.464	3.306	1 11⁄32	1.388	1.175	0.12	0.04	4.25	4.5
2 1⁄4	2.25	2.305	2.214	3 3⁄8	3.375	3.262	3.897	3.719	1 1⁄2	1.548	1.327	0.19	0.06	4.75	5
2 1⁄2	2.5	2.559	2.461	3 3⁄4	3.75	3.625	4.33	4.133	1 21⁄32	1.708	1.479	0.19	0.06	5.25	5.5
2 3⁄4	2.75	2.827	2.711	4 1⁄8	4.125	3.988	4.763	4.546	1 13⁄16	1.869	1.632	0.19	0.06	5.75	6
3	3	3.081	2.961	4 1⁄2	4.5	4.35	5.196	4.959	2	2.06	1.815	0.19	0.06	6.25	6.5
3 1⁄4	3.25	3.335	3.21	4 7⁄8	4.875	4.712	5.629	5.372	2 3⁄16	2.251	1.936	0.19	0.06	6.75	7
3 1⁄2	3.5	3.589	3.461	5 1⁄4	5.25	5.075	6.062	5.786	2 5⁄16	2.38	2.057	0.19	0.06	7.25	7.5
3 3⁄4	3.75	3.858	3.726	5 5⁄8	5.625	5.437	6.495	6.198	2 1⁄2	2.572	2.241	0.19	0.06	7.75	8
4	4	4.111	3.975	6	6	5.8	6.928	6.612	2 11⁄16	2.764	2.424	0.19	0.06	8.25	8.5

Stainless Steel 316l Stud Bolts Dimensions Chart :

Other Studs Dimensions

Continuous Thread Studs

Tap End Studs (1.5D Engagement)

Clamping Type Studs

Length Tolerances — LT for Continuous Thread and Clamping Type Studs, and L for Tap End Studs

Double End Studs

All dimensions are in mm unless mentioned otherwise

Nominal Size Diameter, D inch	Tap End Full Thread Length, BM			Umax = 2P			Minimum Nut End Full Thread Length, Bmin
Nominal Size Diameter, D inch	Nominal	Min.	Max.	UNC & NC-5 Thread	UNF Thread	8UN Thread	L ≤ 10	10 < L ≤ 16	L > 16
1/4	0.375	0.350	0.400	0.100	0.071	...	0.750	1.000	1.500
5/16	0.469	0.440	0.498	0.111	0.083	--	0.875	1.125	1.625
3/8	0.563	0.532	0.594	0.125	0.083	--	1.000	1.250	1.750
7/16	0.656	0.620	0.692	0.143	0.100	--	1.125	1.375	1.875
1/2	0.750	0.708	0.792	0.154	0.100	--	1.250	1.500	2.000
9/16	0.844	0.802	0.896	0.167	0.111	--	1.375	1.625	2.125
5/8	0.938	0.892	0.983	0.182	0.111	--	1.500	1.750	2.250
3/4	1.1.25	1.075	1.175	0.200	0.125	--	1.750	2.000	2.500
7/8	1.313	1.258	1.368	0.222	0.143	--	2.000	2.250	2.750
1	1.500	1.438	1.562	0.250	0.167	--	2.250	2.500	3.000
1 1/8	1.688	1.625	1.750	0.286	0.167	0.250	2.500	2.750	3.250
1 1/4	1.875	1.813	1.938	0.286	0.167	0.250	2.750	3.000	3.500
1 3/8	2.063	2.000	2.125	0.333	0.167	0.250	3.000	3.250	3.750
1 1/2	2.250	2.188	2.313	0.333	0.167	0.250	3.250	3.500	4.000
1 5/8	2.438	2.375	2.500	--	--	0.250	3.500	3.750	4.250
1 3/4	2.625	2.563	2.688	0.400	--	0.250	3.750	4.000	4.500
1 7/8	2.813	2.750	2.875	--	--	0.250	4.000	4.250	4.750
2	3.000	2.925	3.075	0.444	--	0.250	4.250	4.500	5.000
2 1/4	3.375	3.300	3.450	0.444	--	0.250	4.750	5.000	5.500
2 1/2	3.750	3.675	3.825	0.500	--	0.250	5.250	5.500	6.000
2 3/4	4.125	4.050	4.200	0.500	--	0.250	5.750	6.000	6.500
3	4.500	4.425	4.575	0.500	--	0.250	--	6.500	7.000
3 1/4	4.875	4.775	4.975	0.500	--	0.250	--	7.000	7.500
3 1/2	5.250	5.150	5.350	0.500	--	0.250	--	7.500	8.000
3 3/4	5.625	5.525	5.725	0.500	--	0.250	--	8.000	8.500
4	6.000	5.900	6.100	0.500	--	0.250	--	8.500	9.000

Stainless Steel 316l Nuts Dimensions :

Other Nut Dimensions

Square And Hex Machine Screw Nuts

Hex Thick Nuts

Hex Thick Slotted Nuts

Heavy Hex Nuts and Heavy Hex Jam Nuts

Heavy Square Nuts

Hex Flat Nuts And Hex Flat Jam Nuts

Hex Slotted Nuts

Heavy Hex Slotted Nuts

Hex Flange Nuts and Large Hex Flange Nuts

Hex Nuts And Hex Jam Nuts

Square Nuts

Hex Coupling Nuts

Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts

All dimensions are in mm unless mentioned otherwise

Nominal Size inch	Basic Major Diameter of Thread	Width Across Flats, F			Width Across Corners, G		Thickness Heavy Hex Nuts, H			Thickness Heavy Hex Jam Nuts, H1			Maximum Runout of Bearing Surface to Thread Axis, FIM
													Heavy HEX NUTS		Heavy Hex Jam Nuts
													Specified Proof load		Heavy Hex Jam Nuts
		Basic inch	Min.	Max	Min.	Max	Basic inch	Min.	Max	Basic inch	Min.	Max	Up to 150,000 psi	150,000 psi and Greater	All Strength Levels
1/4	0.2500	1/2	0.488	0.500	0.556	0.577	15/64	0.218	0.250	11/64	0.156	0.188	0.017	0.011	0.017
5/16	0.3125	9/16	0.546	0.562	0.622	0.650	19/64	0.280	0.314	13/64	0.186	0.220	0.020	0.012	0.020
3/8	0.3750	11/16	0.669	0.688	0.763	0.794	23/64	0.341	0.377	15/64	0.216	0.252	0.021	0.014	0.021
7/16	0.4375	3/4	0.728	0.750	0.830	0.866	27/64	0.403	0.441	17/64	0.247	0.285	0.022	0.015	0.022
1/2	0.5000	7/8	0.850	0.875	0.969	1.010	31/64	0.464	0.504	19/64	0.277	0.317	0.023	0.016	0.023
9/16	0.5625	15/16	0.909	0.938	1.037	1.083	35/64	0.526	0.568	21/64	0.307	0.349	0.024	0.017	0.024
5/8	0.6250	1 1/16	1.031	1.062	1.175	1.227	39/64	0.587	0.631	23/64	0.337	0.381	0.025	0.018	0.025
3/4	0.7500	1 1/4	1.212	1.250	1.382	1.443	47/64	0.710	0.758	27/64	0.398	0.446	0.027	0.020	0.027
7/8	0.8750	1 7/16	1.394	1.438	1.589	1.660	55/64	0.833	0.885	31/64	0.458	0.510	0.029	0.022	0.029
1	1.0000	1 5/8	1.575	1.625	1.796	1.876	63/64	0.956	1.012	35/64	0.519	0.575	0.031	0.024	0.031
1 1/8	1.1250	1 13/16	1.756	1.812	2.002	2.093	1 7/64	1.079	1.139	39/64	0.579	0.639	0.033	0.027	0.033
1 1/4	1.2500	2	1.938	2.000	2.209	2.309	1 7/32	1.187	1.251	23/32	0.687	0.751	0.035	0.030	0.035
1 3/8	1.3750	2 3/16	2.119	2.188	2.416	2.526	1 11/32	1.310	1.378	25/32	0.747	0.815	0.038	0.033	0.038
1 1/2	1.5000	2 3/8	2.300	2.375	2.622	2.742	1 15/32	1.433	1.505	27/32	0.808	0.880	0.041	0.036	0.041
1 5/8	1.6250	2 9/16	2.481	2.562	2.828	2.959	1 19/32	1.556	1.632	29/32	0.868	0.944	0.044	0.038	0.044
1 3/4	1.7500	2 3/4	2.662	2.750	3.035	3.175	1 23/32	1.679	1.759	31/32	0.929	1.009	0.048	0.041	0.048
1 7/8	1.8750	2 15/16	2.844	2.938	3.242	3.392	1 27/32	1.802	1.886	1 1/32	0.989	1.073	0.051	0.044	0.051
2	2.0000	3 1/8	3.025	3.125	3.449	3.608	1 31/32	1.925	2.013	1 3/32	1.050	1.138	0.055	0.047	0.055
2 1/4	2.2500	3 1/2	3.388	3.500	3.862	4.041	2 13/64	2.155	2.251	1 13/64	1.155	1.251	0.061	0.052	0.061
2 1/2	2.5000	3 7/8	3.750	3.875	4.275	4.474	2 29/64	2.401	2.505	1 29/64	1.401	1.505	0.068	0.058	0.068
2 3/4	2.7500	4 1/4	4.112	4.250	4.688	4.907	2 45/64	2.647	2.759	1 37/64	1.522	1.634	0.074	0.064	0.074
3	3.0000	4 5/8	4.475	4.625	5.102	5.340	2 61/64	2.893	3.013	1 45/64	1.643	1.763	0.081	0.070	0.081
3 1/4	3.2500	5	4.838	5.000	5.515	5.774	3 3/16	3.124	3.252	1 13/16	1.748	1.876	0.087	0.075	0.087
3 1/2	3.5000	5 3/8	5.200	5.375	5.928	6.207	3 7/16	3.370	3.506	1 15/16	1.870	2.006	0.094	0.081	0.094
3 3/4	3.7500	5 3/4	5.562	5.750	6.341	6.640	3 11/16	3.616	3.760	2 1/16	1.990	2.134	0.100	0.087	0.100
4	4.0000	6 1/8	5.925	6.125	6.755	7.073	3 15/16	3.862	4.014	2 3/16	2.112	2.264	0.107	0.093	0.107

Stainless Steel 316l Washer Dimensions Chart :

Other Washer Dimensions

Backup Rivet Washer

Bearing Washer

Ball Bearing Washer

All dimensions are in mm unless mentioned otherwise

Nominal Size								T					Clipped Width E, Min.
	I.D.			O.D.			Standard			Extra Thick
[Note (1)]		Max.	Min.		Max.	Min.		Max.	Min.		Max.	Min.	[Note (2)]
12		14.4	14		27	25.7		4.6	3.1		10	8	10.5
16		18.4	18		34	32.4		4.6	3.1		10	8	14
20		22.5	22		42	40.4		4.6	3.1		10	8	17.5
22		24.5	24		44	42.4		4.6	3.4		10	8	19.2
24		26.5	26		50	48.4		4.6	3.4		10	8	21
27		30.5	30		56	S4.1		4.6	3.4		10	8	23.6
30		33.6	33		60	58.1		4.6	3.4		10	8	26.2
36		39.6	39		72	70.1		4.6	3.4		10	8	31.S
42		45.6	45		84	81.8		7.2	4.6		10	8	36.7
48		52.7	52		95	92.8		7.2	4.6		10	8	42
56		62.7	62		107	104.8		8.7	6.1		10	8	49
64		70.7	70		118	115.8		8.7	6.1		10	8	56
72		78.7	78		130	127.5		8.7	6.1		10	8	63
80		86.9	86		142	139.5		8.7	6.1		10	8	70
90		96.9	96		159	156.5		8.7	6.1		10	8	78.7
100		107.9	107		176	173.5		8.7	6.1		10	8	87.5

Different Types Of Stainless Steel 316L Fasteners

Different Types Of Bolts:

Different Types Of Nuts:

Different Types Of Washer:

Different Types Of Screw:

Application of Stainless Steel 316L Fasteners

Construction Bridges Petrochemical Industry Ship Building Engineering General Structural Purposes

Testing of Stainless Steel 316L Fasteners

Chemical Analysis – Spectro Analysis Intergranular Corrosion (IGC) Test Pitting Resistance Test Hardness Test Dye Penetrant Test (DP Test) Micro Test Flaring Test

Packing Of Stainless Steel 316L Fasteners

Boxes and Crates Carton boxes Wooden boxes Shrink-wrapped Wooden crates

Destination Of Stainless Steel 316L Fasteners

ASTM A193 Stainless Steel 316L Hex Nut Exporter in Hyderabad, ASME SA193 SS 316L Allen Bolt Supplier in Pimpri-Chinchwad, Din 1.4404 Bolt Supplier in Chennai, ASME SA193 SS 316L Stud Bolt Exporter in Jamnagar, UNS S31603 Stud Bolt Exporter in Jamnagar, Din 1.4404 Lag Bolt Manufacturer in Jamnagar, ASTM A193 Stainless Steel 316L Fasteners Manufacturer in Pune, Werkstoff Nr 1.4404 Threaded Rod Stockist in Pimpri-Chinchwad, ASME SA193 SS 316L Fasteners Manufacturer in Pune, Werkstoff Nr 1.4404 Heavy Hex Nut Supplier in Coimbatore, UNS S31603 Nut Manufacturer in Hyderabad, UNS S31603 Heavy Hex Bolt Stockist in Chennai, Din 1.4404 Threaded Rod Stockist in Pimpri-Chinchwad, ASTM A193 Stainless Steel 316L Hex Bolt Stockist in Coimbatore, ASTM A193 Stainless Steel 316L Bolt Supplier in Chennai, Werkstoff Nr 1.4404 U Bolt Exporter in Pune.

ASTM A193 Stainless Steel 316L Bolt Supplier in Qatar, UNS S31603 Heavy Hex Bolt Stockist in Indonesia, Din 1.4404 Lag Bolt Manufacturer in Singapore, Werkstoff Nr 1.4404 Threaded Rod Stockist in Dubai, Din 1.4404 Threaded Rod Stockist in Dubai, ASME SA193 SS 316L Allen Bolt Supplier in Malaysia, Din 1.4404 Bolt Supplier in Qatar, Werkstoff Nr 1.4404 Heavy Hex Nut Supplier in Brazil, ASME SA193 SS 316L Stud Bolt Exporter in Saudi Arabia, ASME SA193 SS 316L Fasteners Manufacturer in UAE, ASTM A193 Stainless Steel 316L Hex Nut Exporter in Argentina, UNS S31603 Nut Manufacturer in Nigeria, ASTM A193 Stainless Steel 316L Hex Bolt Stockist in South Africa, UNS S31603 Stud Bolt Exporter in Saudi Arabia, ASTM A193 Stainless Steel 316L Fasteners Manufacturer in UAE, Werkstoff Nr 1.4404 U Bolt Exporter in Tanzania.

ASTM A193 Stainless Steel 316L Hex Bolt Catalogue, ASTM A193 Stainless Steel 316L Hex Nut Weight Calculator, UNS S31603 Heavy Hex Bolt Price List in India, Din 1.4404 Lag Bolt Weight Chart, Din 1.4404 Bolt Weight Calculator, Din 1.4404 Threaded Rod at Factory Price, ASME SA193 SS 316L Allen Bolt Price List, UNS S31603 Stud Bolt Price List, ASME SA193 SS 316L Fasteners Catalogue, ASME SA193 SS 316L Stud Bolt Price List in India, ASTM A193 Stainless Steel 316L Fasteners Price List, Werkstoff Nr 1.4404 Heavy Hex Nut Price Per Kg, Werkstoff Nr 1.4404 Bolt Weight Chart, Werkstoff Nr 1.4404 U Bolt at Factory Price, Werkstoff Nr 1.4404 Threaded Rod Weight Chart, UNS S31603 Nut Price Per Kg, Din 1.4404 Heavy Hex Nut Catalogue, ASME SA193 SS 316L Hex Nut Price Per Kg, Werkstoff Nr 1.4404 Heavy Hex Bolt Weight Calculator.

STAINLESS STEEL FASTENERS

FASTENERS

SERVICE DOWNLOADS

Stainless Steel 316L Fasteners

ASTM A193 Stainless Steel 316L Fasteners, Werkstoff Nr 1.4404 Threaded Rod, ASME SA193 SS 316L Stud Bolt, Din 1.4404 Bolt, UNS S31603 Nut, ASTM A193 Stainless Steel 316L Hex Bolt, Werkstoff Nr 1.4404 U Bolt, Din 1.4404 Bolt.

About Stainless Steel 316L Fasteners

ASME SA193 SS 316L Fasteners Manufacturer, Din 1.4404 Bolt stockist, Stainless Steel 316L Hex Nut S31603 Supplier, ASTM A193 UNS S31603 Heavy Hex Bolt Exporter, UNS S31603 Bolt Manufacturer, SS 316L Allen Bolt Exporter.

Types Of Stainless Steel 316L Fasteners

Stainless Steel 316L Fasteners Specification

Equivalent Grades Stainless Steel 316L Fasteners

Chemical Composition Stainless Steel 316L Fasteners

Mechanical Properties Stainless Steel 316L Fasteners

Dimensions Of Stainless Steel 316L Fasteners

Stainless Steel 316l Bolts Dimensions Chart :

Other Bolt & Screw Dimensions

Stainless Steel 316l Stud Bolts Dimensions Chart :

Other Studs Dimensions

Stainless Steel 316l Nuts Dimensions :

Other Nut Dimensions

Stainless Steel 316l Washer Dimensions Chart :

Other Washer Dimensions

Different Types Of Stainless Steel 316L Fasteners

Different Types Of Bolts:

ASTM A193 SS316l Hex Bolts

DIN 1.4404 Carriage Bolts

Stainless Steel 316L Stud Bolts

316l SS Hex Head Bolts

SS 316l Forged Hook Bolts

316l Stainless Steel Torx Bolts

Stainless Steel 316l Countersunk Bolts

Alloy 316l Flange Head Bolts

SS 316l Allen Bolts

UNS S31603 12-Point Flange Bolts

ASTM A193 UNS S31603 Eye Bolts

A2-70 Stainless Steel Bolts

AISI 316l U Bolts

316l Stainless Steel J Bolts

316l Stainless Steel Elevator Bolt

ASTM A193 Grade 316l Threaded Expansion Anchor Bolt

ASME SA 193 High Performance Anchor Bolts

UNS S31603 Lag Bolts

Different Types Of Nuts:

ASTM A193 SS316l Hex Nuts

ASME SA193 SS 316l T Nuts

Stainless Steel 316l Metric Nuts

UNS S31603 Rivet Nuts

316l SS Sleeve Nuts

SS 316l 12-Point Nuts

ASTM A193 Grade 316l Lug Nut

DIN 1.4404 Captive Nuts

Alloy 316l Dome Nuts

ASME SA 193 Acorn Nuts

SS 316l Nyloc Nuts

UNS S31603 Insert Nuts

316l Stainless Steel Lock Nuts

ASTM A193 UNS S31603 Castle Nuts

AISI 316l Square Nuts

Different Types Of Washer:

ASTM A193 SS316l Plain Washer

ASME SA193 SS 316l Tab Washer

Stainless Steel 316l Spring Washer

UNS S31603 Sealing Washer

316l SS Lock Washer

UNS S31603 Square Washer

ASTM A193 Grade 316l Flat Washer

DIN 1.4404 Split Washer

Alloy 316l Star Washer

Different Types Of Screw:

ASTM A193 SS316l Torx Screws

SS 316l Self Drilling Screws

DIN 1.4404 Grub Screws

ASME SA193 SS 316l Countersunk Screws

Stainless Steel 316l Self Tapping Screws

ASTM A193 Grade 316l Wood Screws

UNS S31603 Roofing Screws

Application of Stainless Steel 316L Fasteners

Testing of Stainless Steel 316L Fasteners

Packing Of Stainless Steel 316L Fasteners

Destination Of Stainless Steel 316L Fasteners

Table of Contents

ASTM A193 Grade 316l
Wood Screws